How to bubble wrap your windows to save money

What we normally associate with moving or packing fragile items so they won’t break. The bubble wrap air pockets that provide a cushion against impact, can also provide a barrier to reduce the flow of cold air. The concept is the same way as dual pane windows providing a pocket of air between 2 panes of glass. It’s the air provides the insulating value, as it slows down the transfer of air.
bubble-wrap-creative-uses

Top 5 Reasons to Use Bubble Wrap to Insulate Your Windows

  • Bubble wrap can be reused for several years, generally 5-7. You’ll know it’s time to replace the wrap when it sticks to the window and removing it gets difficult.
  • Unlike insulating shades that block the sunlight, bubble wrap is clear and lets most of the sunlight through so you still have a cozy, inviting room that is warmer and feels more open.
  • Bubble wrap is easy to put up, take down and roll up to store over the summer. You should label each piece of bubble wrap as they’ll all look the same when you take them down. Draw a layout of the rooms and label each window and sealed air bubble wrap, i.e. DLB = dining room left window bottom, DLT, DRB, DRT, etc.
  • Hardware stores sell “window sealing kits” that use sticky tape. When the sticky tape sits too long, it’s difficult to remove. The film isn’t reusable so you’ll need to buy a new kit each year.
  • Get creative on finding your bubble wrap, as lots of people are throwing it out. Check with furniture stores and other retailers who throw away bubble wrap on a frequent basis and volunteer to dispose of it for them.

Installing Your Bubble Wrap Instructions

  • Measure each window pane, following the well known rule “measure twice, cut once” … following diagram shown here.
  • Cut the bubble wrap, using a paper template if that will make you more comfortable.
  • Spray a light film of water on the window using a small spray bottle. If it’s used, clean it thoroughly as you don’t want to leave a film on your glass or worry about the bubble plastic.
  • Press the bubble side against the window while it’s still wet, and position it to fill the space fully.  A tight fit means both the air trapped inside the bubbles, and the air between the window pane and the back of the bubble wrap will help reduce air flow, and save you heating dollars.
  • If the bubble wrap starts to separate from the window, the recommendation at BuildItSolar.com is to add glycerine to the water.

LEAVE A COMMENT

Your email address will not be published. Required fields are marked *